Paper Star Light 60 Dokumentskab (356 L) - Indbrudstest S2 / Brandtest 30m

od 1 873,00 Kč 1 547,93 Kč
  • S2 is the second certification class. This safe is more resistant than S1.
  • Internal temp. lower than 170ºC during 30 min with external temp. above 842ºC

Více info
NázevPaper Star Light 60 Dokumentskab (356 L) - Indbrudstest S2 / Brandtest 30m
ModelPaper Star Light 60
Safe SeriesFormat Paper Star Light
Safe KindFree Standing
Safe PurposeCash, Documents, Valuables
Bezpečnostní třídaS2
Metoda testováníEN 14450
Certifikační centrum:ECB•S Německo
Cash RatingS2
Fire Duration30 Minutes
Fire ClassificationEN 15659: LFS 30 P
Fire Test MethodEN 15659
Fire Test center ECB•S Germany
Shelf (Standard)1 Movable shelf
Capacity - Liter356
Capacity - Binders28
Výška - vnější (mm)817
Šířka - vnější (mm)1252
Hloubka - vnější (mm)570
Depth incl. Lock / Handle (mm)612 Kč
Výška - vnitřní (mm)724 Kč
Šířka - vnitřní (mm)1 156 Kč
Hloubka - vnitřní (mm)425 Kč
Door Opening - Height (mm)684
Door Opening - Width (mm)1124
Door Opening - Angle180 Degrees - External Hinges
Width - Door Open 180 Degrees2470
Depth - Door Open 90 degrees1218
Door TypeDouble doors
Door Bolts3-sided bolts (Ø 20 mm)
Hinges sideDouble Doors (Hinges in both sides)
Door Structure3-walled steel
Body structureDouble-walled
Dotazy Zákazníků.
Order & Delivery: All you need to know

SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.

Safe locks: All you need to know

Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.

Install a safe: How can I bolt the safe myself?

Be aware that there are no wiring or piping in the location you want to install the safe.  

Follow these steps to bolt your safe:

You can easily bolt your safe following 8 simple steps.

1. Place the safe onto its final position.
   2. Mark the spot on the floor or the wall where the bolting holes are located.
   3. Move the safe aside.
   4. Make sure you use the right drill for the material and an appropriately sized drill bit.
   5. Drill holes into the designated marks.
   6. Reposition the safe over the mounting hole.
   7. Insert the bolt through the inside of the safe into the hole.
   8. Tighten up the nut of the bolt.



Našli jste to, co jste hledali